Q&A / 

Installing ceramic tile and keeping it great looking lies in making sure its base is strong. Floor leveling will keep ceramic tile work beautiful and crack free.

READ THE ANSWER »

If you have to make repairs in a wet tiled area make sure you know what materials will work to keep things dry. Pick the right backer board for the job. A few simple tools will help with tile cutting. Your job will look great.

 

READ THE ANSWER »

Ceramic tile replacement may not be the only answer to cracked and loose tiles. Consider ceramic tile repair by a good artist. First thing to do is reconnect the loose tile and clean out grout lines before grouting tiles again. The cracks can be repaired and camouflaged to your satisfaction.

READ THE ANSWER »

Ceramic tile failure can be directly connected to your backer board getting wet. Cement board and gypsum core board are the best products to use when applying ceramic tile in your bathrooms. Successful tile adhesion comes with proper tile installation.

READ THE ANSWER »

Laying ceramic tile floors will look great if you follow my tips below. Be sure the floor joist spacing is correct for laying tile. The subfloor or underlayment must be a thick enough plywood or a cement board that the tile above it won't crack. Make sure if you are using plywood that you leave expansion room to keep the floor from buckling and breaking the tiles.

READ THE ANSWER »

Removing grout from ceramic tile showers and tubs can be done without tile removal. It is a job done by hand or with a small electric grinder. You will need a lot of patience before you start grouting tile again. Be careful not to scratch your ceramic tile.

READ THE ANSWER »

Put a ceramic shower seat in your bathroom. Make it attractive and waterproof. Shower stall seats are a great convenience. Make them out of cultured marble, ceramic tile, marble, granite or solid surface countertop material.

 

READ THE ANSWER »

Ceramic tile installation in your bathroom can be a great remodeling job. Be sure your waterproof wall behind the tile is cement board. Consider installing a seamless vapor barrier, also.

READ THE ANSWER »

If you want to know how to install ceramic tile in your bathroom or any room, be prepared for some work. It can be fun, and it may become your favorite job. With luck, your walls are plumb and level to make the job go smoothly. Use some of my tips and your ceramic tile installation will look great.

READ THE ANSWER »

If you are about to build a ceramic tile shower, you better pay close attention to details. A ceramic tile shower that has tile for the floor must be built with a special membrane that diverts water to the drain. Installing ceramic tile in showers may be easy, but don't underestimate the work involved to install the special liner so it is 100 percent waterproof.

READ THE ANSWER »

SPONSORS /