Climate Change Myth Debunked

athabasca glacier canada

Climate Change Debate | This is the Athabasca Glacier in the Canadian Rockies. It's the poster child for the man-made climate change group. They point to this glacier's rapid retreat and melting as proof positive that man is ruining the planet. The melt rate of this glacier is minuscule compared to the rapid melt rate of the massive continental glacier just 15,000 years ago. Read below for all the FACTS about the last continental glacier. I took the above photo of the Athabasca Glacier in 2012. Copyright 2024 Tim Carter

Man-Made Climate Change is Questionable - Why? Look at the Rocks

SUMMARY: Climate change is real. It's been changing for millions of years long before man started introducing carbon dioxide into the atmosphere.

Everything that follows is a fact. I've been an expert witness in home improvement lawsuits for over 25 years. Courts and judges require me to tell the truth, the WHOLE truth, and nothing but the truth in depositions and on the witness stand. 

You need to know the whole truth to make the correct decision about any topic. What you're about to read are climate change TRUTHS that have been withheld from you by the media, many scientists, and others.

It's important for you to realize my college degree is in geology with a focus on continental glaciation. The following are facts found in any treatise on Continental Glaciation:

  • Twenty-thousand years ago the last continental glacier in the USA reached its maximum advance
  • It averaged 3,000 feet in thickness
  • This massive glacier extended from the North Pole across most of Canada, and all of New England down to New York City
  • The thick glacier extended across the upper Midwest and much of the Rocky Mountains were engulfed in deep snow and mountain glaciers
  • This monstrous glacier started to melt about 15,000 years ago
  • It retreated back to the North Pole within 7,000 years
  • The climate went from arctic to tropical in a matter of a few thousand years creating this rapid melting rate
  • There were no factories, power plants, buses, trucks, etc. spewing CO2 during this time period all those thousands of years ago
  • Mother Nature changed the climate as she did three other times in the past 2,000,000 years

Why haven't you seen the above facts that are etched into the geologic record?

Why doesn't the mainstream media share these facts?

The X post below shows that USA Today, a mainstream media member, knows all about the geologic record, but they choose not to share the whole truth with you.

usa today twitter post climate change

USA Today states man-made climate change is real. This X post says is it's not. There were no fossil fuels burning in Medieval Times for goodness sake. How was it that Greenland was green hundreds of years ago when man was creating NO CO2?

Are you on the side of the debate thinking that man-made CO2 exhaust will create devastation? If so, you better watch this video because CO2 is not the issue.

Do you think Al Gore is a climate expert? Are you aware that just about all his predictions never came true? Why is it that the mainstream media doesn't point out that Mr. Gore's predictions have not panned out?

Do you believe the world will end in 2032 because of climate change? New York Congresswoman Alexandria Ocasio-Cortez made this bold claim in a speech.

Stop and ask yourself WHY you believe in man-made climate change.

Read Dr. Robert Cialdini's Influence - The Psychology of Persuasion book. You'll discover the powerful psychological triggers of social proof, authority, and scarcity which can be used to influence how you feel about a topic, product, or political movement.

Influence Book Cover

You need to apply critical thinking to the climate change issue. It demands it, or otherwise, you could find yourself on the wrong side of history just like all those old scientists who swore the Earth was flat.

Think about that. Think how vicious that argument was hundreds of years ago and how those who disagreed with the flat-earthers were persecuted.

History Shows the Experts Can Be Wrong

Scientists hundreds of years ago preached the earth was the center of the solar system. They were wrong.

Doctors hundreds of years ago believed that blood-letting would cure many illnesses and disease. They were wrong.

Scientists hundreds of years ago stated the Earth was flat. They were wrong.

It's possible we're at one of these moments in time now. The current scientists that claim man is changing the climate may be wrong.

Climate Change Myth Debunked - Look At Rocks For the Truth

My college degree is in geology. Think about the old saying cast in stone and what it means. The true story of climate change is cast in the geologic record all over the world. The facts locked in the rocks are irrefutable.

Here are some basic geologic facts that prove man-made climate change is questionable at best:

  • vast continental glaciers have advanced and retreated in North America four times in the past 2,000,000 years
  • no CO2-belching factories, buses, cars, trucks, coal-fired power plants, etc. existed during that time
  • mountains in the Northeast USA have giant glacial scratches proving the glaciers were there
  • enormous glacial outwash deposits are scattered all over the Northeast and Midwest USA from the glaciers
  • New York State's Finger Lakes were created by the continental glaciers
  • Central Park in New York City has exposed bedrock with deep glacial striations - the venerable New York Times produced an in-depth feature about this

Geologic data contained in and on top of rocks can't be altered by scientists. Rocks, sand, and gravel tell no lies. If you want the truth, you look at geologic data. Rocks don't make mistakes but scientists can.

You can see evidence of climate change in New Hampshire geology. No humans were around creating CO2 to create this climate change.

New York City Glacial Striations - Evidence Abounds

You can spend a day or two or three examining all of the continental glaciation facts in and about New York City.

This past article in the New York Times offers you some stunning illustrations, facts, and history.

Look at this photo of a huge glacial striation in the Pemigewasset River just a mile south of Bristol, New Hampshire. The bowl-shaped groove was cut in the granite bedrock as the huge continental glacier slid over the rock using fine stones in the ice to grind the groove:

glacial striation new hampshire pemigewasset river

The red arrow points to the glacial striation. (C) Copyright 2021 Tim Carter ALL RIGHTS RESERVED

Athabasca Glacier Facts - The Cold Truth

athabasca glacier canada

This is a close-up shot of the Athabasca glacier. I was standing on it about a mile up from its terminus. While it seems enormous, it's not compared to massive continental glaciers. Copyright 2018 Tim Carter

It's important to realize the man-made climate change community points to the Athabasca Glacier in the Canadian Icefields as proof that man is to blame for climate change.

I've walked on the Athabasca Glacier. It's a very small glacier. The glacier is maybe 3 miles long and less than 1,000 feet wide at its terminus.

The Athabasca Glacier is thin. It's only several hundred feet thick at most.

Since the late 1800s, when we've been spewing CO2 into the atmosphere, the glacier has retreated less than one mile.

That equals about 37 feet 6 inches of melting per year. You can confirm this with ease. Go do it now.

The USA's continental glaciers were huge. They melted much faster 15,000 years ago than the current rate of glacier melt worldwide.

cross-bedded glacial sand in nh

This is cross-bedded sand and small gravel in central New Hampshire. It's far above the current river bed of the Pemigewasset River. The last continental glacier's meltwater deposited this sand about 12,000 years ago. I took this photo in 2017 at the Pemigewasset Valley Fish & Game Club. The credit card is for scale. Copyright 2018 Tim Carter

Continental Glacier Melt Facts

The last continental glacier was massive. It covered the North Pole and extended to Cape Cod, Massachusetts. The tremendous glacier left a nice conversation piece for you to look at.

It's called the Doane Rock - a glacial erratic boulder.

In addition, consider these additional continental glacier melting facts:

Glacial Map of Ohio

This is the glacial geology map of the state of Ohio. It shows the different geologic evidence of the massive continental glaciers. Copyright 2018 State of Ohio

Summary - Always Look At Rocks for the Truth

The massive continental glaciers were thousands of feet thick. They covered tens of thousands of square miles. The minuscule Athabasca glacier is a tiny pin prick on a map compared to the huge ice sheets.

The massive ice sheets melted at a far faster rate than the Athabasca glacier is retreating. That evidence is undeniable.

There was no man-made CO2 around during the four periods of continental glaciation that occurred in the past 2,00,000 years.

If you want the truth, always follow the money and study the rocks.

Just as history eventually showed that scientists and experts were wrong about blood-letting, the earth being the center of the solar system/universe and the earth supposedly was flat, you may live to see that man-made climate change might not be true.

Kenny Chesney wrote a great song about this. Listen.

Frost on Nails in Attic

frost on nails

This is frost on a piece of high quality insulated glass in my man cave. The outdoor temperature was minus 6 F and there's NO humidifier in this building! The same frost on nails could be happening in my attic! Copyright 2018 Tim Carter

Frost on nails in attic spaces may frighten you. It should to a degree. It's important to realize frost is in your attic for a few reasons.

Frost on Nails is Frozen Condensation

Remember the last hot and humid day you were sitting outside drinking a cold beer, iced tea, soda or glass of ice water? The outside of the can or glass had drops of water on it that rolled down and got the table wet.

Another key point is the water moments before was invisible. The water was a gas in the air surrounding you and the can or glass.  The water is the same thing that creates the uncomfortable humidity most people loathe.

This exact same process is happening in your attic during extreme cold weather. The nails that you see in your attic get as cold as the outdoor temperature. The air in the attic has water in it and it condenses on the cold metal.

A point often overlooked is that since it's winter, the water freezes on the cold nails. This is why you see the frost.

frost on nails

A tool like this shoots nails through shingles. The tips of the nails are supposed to penetrate through the wood on your roof. The nails are 0 F too as long as the roof is shaded. Copyright 2018 Tim Carter

Related Links

Turbine Whirlybirds Can STOP FROST

Frost in Attics - Mystery Revealed! and How to Eliminate It

Free & Fast Bids

CLICK HERE to get FREE & FAST BIDS from local roofers that can increase the amount of ventilation to STOP FROST.

How to STOP the Frost on Nails

At the present time, here's how to stop the frost you're seeing in your attic:

  • lower the humidity in the house
  • increase air flow through attic

It's not easy to lower the humidity in your home. Many sources advise you to ADD humidity to your indoor air to feel warmer in the winter.

It's easier to increase the air moving through your attic using roof turbine vents and other traditional roof vents.

It must be remembered you must have great soffit ventilation so the air travels through your attic as a constant breeze.

Without delay this air movement brings in drier outdoor air into the attic. The dry air evaporates the frost!

Old Houses Didn't Have Frost

A point often overlooked is old houses didn't have this frost on nails problem.

The houses were drafty and the humidity couldn't build up to cause a problem. Your modern house is much tighter and the humidity can soar.

January 3, 2018 AsktheBuilder Second Newsletter

As often happens with a special announcement, I LEAVE OUT important information in the rush to get news to you.

Within minutes of sending out the last message, James wrote:

"Can you also do a newsletter to cover frozen pipes? I'm have to deal with it this morning in one of the upstairs bathrooms. Fortunately, it has not burst and there's a slow drip. I'm heating the pipes with hair dryers and those thermal tapes. But I'm looking for a more permanent preventative measure (aside from having to leave the cabinet doors open and running a slow drip at night) ... also I want to avoid having to tear everything up as well."

What do you know?

I created a NEW COLUMN about Preventing Frozen Pipes last night before supper!

CLICK HERE to read it.

It contains UNCONVENTIONAL information you'll not usually find in columns written by people telling you to run water, open cabinet doors, install UNSAFE heat tape, blah blah blah blah.

Those are temporary fixes that sometimes work. If you want to STOP frozen pipes forever, then CLICK HERE.

Once again, PLEASE FORWARD this message to anyone you know who has frozen pipes.

Sadly for James, I've got bad news if he wants a permanent fix.

He's going to tear a few things up, but he'll NEVER EVER AGAIN have frozen pipes.

GREAT VIDEO About Staying Warm

The column I wrote two hours ago has a GREAT VIDEO in it about why your house is COLD.

CLICK HERE and SCROLL DOWN to see it.

I Didn't BUILD the House I Live In

Each time I gritch about my house I get replies like this,

"Tim, how could you install a boiler that's too small? How come you don't have more PEX tubing in the floors so you get more Btus per hour? How could you, the EXPERT, make such a mistake?"

"Tim, why don't you have a great wood stove in the house to add extra heat to stay warm? Do you want me to send you some cheese to have with your WHINE? :-)"

Guess what?

I didn't build the house I'm living in.

I've spent the last eight years correcting many mistakes, but trying to correct this heating deficiency is just way too much work. I'd be ripping out all the finished ceilings in the basement.

No way I'm doing that.

As for the wood stove on the first floor, guess what?

The DUMB A * * architect and homeowner made two fatal flaws in the living room here:

  • it's too small
  • there's no raised hearth

If the living room were five feet longer, you could put an add-on, drop-dead-gorgeous wood stove in the living room.

If there was a raised hearth, you could pipe the stove pipe into the existing metal chimney of the inefficient wood-burning fireplace we have now.

Believe me, when I do build my dream house - I'm trying to make it happen soon - it will be warm as toast if the outdoor temperature drops to -30 F or below.

Tim Carter
Founder - www.AsktheBuilder.com

Do It Right, Not Over!

Pass the Cheese, Tastes Good With My Whine!

January 3, 2018 AsktheBuilder Newsletter

Why You're Cold

Happy New Year!!!!

2018 is off to a bitter start for much of the USA.

Jim Cluett is my very good friend and amateur radio mentor here in NH. I was talking with him yesterday and we were both gritching about the cold weather.

He's lived here in central New Hampshire for most of his life. There was an eight-year period where he was on Prince Edward Island in Canada working as a TV news reporter / producer. He knows all about cold and drifting snow from up there.

"This is the longest and coldest period of weather I ever remember. Sure, we'd get damn cold for a day or two or three, but below zero temperatures night after night for ten days?"

Then yesterday just about 15 miles west of me at another amateur radio friend's house, it was minus 22 F just before dawn.

Are you COLD in your house? I am even though this bad boy below is running constantly.

house cold heat on
That's my boiler. It's running all the time. Each of the eight radiant heating zones in my house is calling for heat. I'm burning about 20 gallons of propane now per day.

Are You or Friends / Family COLD?

An hour ago, I just finished a new SPECIAL COLUMN about what's going on since tens of millions are suffering.

Are you one? Are you cold and you can't figure out WHY because your furnace, boiler or heater is running and you're still cold?

CLICK HERE NOW and read this short column.

Would you do me a favor? A big one?

Would you FORWARD this email / newsletter to any friend, family member, co-worker or ???? who is cold and upset thinking something is wrong with their heater?

I'm afraid they may WASTE MONEY calling in a furnace repair person. If the heater or furnace is running, NOTHING IS WRONG.

A service call is unnecessary.

That's enough for today.

I'll have more new columns for you this weekend.

Stay warm!!!

Yeah, Steve I know you'll not suffer today in Altadena, CA!

Alexa just told me it's going to be 74 F there today.

Happy Birthday Steve!

Tim Carter
Founder - www.AsktheBuilder.com

Do It Right, Not Over!

Size It Right And Not Suffer!

Why Is House Cold With Heating On

house cold

This is my own boiler. If the outdoor temperature drops below 5 F, the house loses more heat each hour than the boiler is able to produce in an hour. The colder it gets outdoors the colder it starts to get indoors. Copyright 2018 Tim Carter

You wake up on a frigid morning or come home from work and your house is cold, yet the heater or furnace is on.

You might mumble out loud as you shiver, "Why is house cold with heating on?"

This is the column Tim asked in his January 3, 2018 AsktheBuilder Newsletter if you would share with your friends, family, etc.

Why Is House Cold? Furnaces Can Only Do So Much

Here's why your house is cold when your heating is running non stop:

  • Furnaces, boilers and electric heaters can only generate X amount of heat per hour
  • Think how shoes, clothes and hats come in different sizes - so to heaters
  • Your builder / HVAC man installed a heater sized for an average low temperature in your city/town

Related Links

Heat Loss Explained - Sizing Heaters and Furnaces

Electric Floor Heat - Very Cozy But Can Be Expensive

Candle in a Warehouse Example

I can explain why you're shivering with this example. Imagine if you had a standard candle and you were in the middle of a large warehouse.

The first thing to remember is there's no way the candle can produce enough heat in one hour to heat up the warehouse to a comfortable temperature.

But put that candle inside a small picnic cooler container and the temperature will get nice and warm in a short amount of time.

Free and Fast Bids

CLICK HERE to get FRE & FAST BIDS from local heating companies that can install a LARGER heater.

Heat Loss Calculations - This Is The Secret

Another key point is heat loss. Your home has a distinct heat loss each hour. Imagine if your house was 70 F inside and it was 0 F outside.

If your power went out and your heater stopped working, the temperature inside starts to drop. Each hour it gets colder and colder because of this heat loss.

Your home may lose heat faster than a neighbor's home because your home has:

  • poor insulation
  • many air leaks
  • ill-fitting weatherstripping around doors and windows
  • lots of windows and doors

It must be remembered that each house has it's own heat loss per hour. A point often overlooked is that your heater, furnace or boiler also can only produce a given amount of heat per hour like the candle above!

As soon as the heat loss per hour is GREATER THAN the heat per hour the heater can produce, your house starts to get uncomfortable. As the outdoor temperature drops lower and lower, it gets colder in your home.

Your Heater Is Sized for AVERAGE Low Temperature

Your heater or furnace is sized according to an average LOW temperature in your city or town.

In other words, it would be wasteful to install a heater in your home that would produce enough heat each hour to heat the giant warehouse we discussed. That would be overkill and waste lots of your money.

Most of the time your heater keeps you comfortable because the outdoor temperature is at or ABOVE the average low outdoor temperature.

Sooner or later bitter cold weather happens and your furnace or heater just can't keep up.

How to Stay Warm in a Cold House!

cold house knit hat

This is how I'm dressed in my cold man cave! Note knit hat, fleece vest, fleece light jacket. You can't see my long underwear and wool socks! Copyright 2018 Tim Carter

It's easy to stay warm when your house is cold. Just do the following:

  • wear long underwear inside
  • put on a knit hat
  • wear wool socks
  • put on layers inside - even a fleece jacket
  • add a SAFE amount of humidity to the air inside your home

CLICK HERE to read all of my past columns dealing with humidifiers, how to set them, alternative ways to add humidity, etc.

These things retain more of your body heat and believe me you'll stay warm!

CLICK HERE to get FREE & FAST BIDS from local heating companies that can install a LARGER heater.

 

Preventing Frozen Pipes

preventing frozen pipes

Preventing frozen pipes was not a priority for the plumber who did this poor job. These CPVC water lines froze even though they were covered with insulation. Copyright 2018 Tim Carter

Water Pipes Need Not Freeze

This is the column Tim added in his January 3, 2018 AsktheBuilder Second Newsletter.

Water supply lines in your home freeze because they get cold. Your plumber or builder should be smart enough to know to keep water lines on the warm sides of floors and walls.

If you want the best advice on how to prevent burst water lines, absolutely click or tap here.

Preventing Frozen Pipes Checklist:

  • Water lines should be installed on the warm side of walls and floors
  • Design house or room addition so plumbing fixtures are not on exterior walls if possible
  • Exterior walls and floors that must have water lines must be oversized and thicker
  • Water lines in exterior walls and cold floors must touch up against warm wall surface
  • Create one-inch air space between water lines and tight-fitting closed cell foam insulation in wall / floor cavity

Related Links:

Frozen Pipes in Outside Walls Are a Thing of the Past

Frozen Pipe Story and Solution

Why Doesn't My Shower Work?

Free & Fast Bids

CLICK HERE to get FREE & FAST BIDS from local plumbers that can install pipes that won't freeze.

Installation Requires Attention To Detail

Extra attention is required for preventing frozen pipes. Do all these things:

  • Use PEX piping in walls subject to freezing. PEX can handle repeated freeze/thaw events without bursting
  • Install separate easy-to-access shutoff valves for water lines that could freeze in case lines burst
  • Turn off water shutoff valves in bitter weather and open faucet valves to release pressure

PEX No-Burst Water Pipe is Easy to Install

Watch me demonstrate how to connect PEX piping to a fitting in about 15 seconds. PEX is something to use when thinking about how you'll take care of preventing frozen pipes. This plastic piping is true DIY plumbing piping material.

You don't need a fancy power tool like you see me use in the video. Simple hand-powered expansion tools can be purchased very affordably.

It's important to realize you can convert to PEX piping from copper, CPVC or any other water supply line. Just use PEX in those walls / floors that are in danger of freezing.


CLICK HERE to get FREE & FAST BIDS from local plumbers that can install pipes that won't freeze.

Laundry Room Ideas

laundry room ideas

Great laundry room ideas are much needed here. This is my laundry room. I didn't design nor build it. You may think it's a nice one. It pretty much SUCKS. Copyright 2018 Tim Carter

Laundry Room Ideas - Beware Of Function Flaws!

Laundry rooms are one of the hardest-working rooms in a house outside of the kitchen. I don't know about you, but I don't go into my laundry room to relax, read, watch TV or jump on my amateur radio.

I go in there to get clothes clean, use the utility sink, iron clothes, feed the dog, etc.

I'll bet you do the same, right?

It's important to realize you must avoid the mistake of making  your laundry room beautiful before making it fully functional.

For one thing you need great laundry room ideas that will allow you to work with minimal frustration.

Keep reading as I've got lots of the ideas you need!

Related Links

Laundry Room Plans - Avoid These Mistakes at All Costs!

Laundry Room Cabinets - Lots & Lots of Choices

Dryer Venting - IMPORTANT TIPS HERE!

Free & Fast Bids

CLICK HERE to get FREE & FAST BIDS from local remodelers who can create a dream laundry room.

Top Five Functional Laundry Room Ideas

Before creating this page I went online and looked at many laundry room photos. Almost all of them could have been in a magazine they were so beautiful.

Beauty is one thing, but function is another. You can have both, but always think of function first.

Here's my top five laundry room function ideas:

  • laundry basket height
  • double-bowl utility sink
  • floor drain
  • waterproof flooring
  • easy access for washer / dryer maintenance

None of the above ideas are sexy, but each one will make your life so much easier.

Laundry Basket Height - It's Most Important

How do you deal with your dirty laundry now? Do you put your basket up on a 36-inch tall countertop? The top of the basket is now almost 54 inches off the floor! That's hard on your shoulders.

Do you put it on the floor? Is the floor always clean and free of dirt and lint? How's your back feel bending over so much to lift the clothes into your washer?

Consider a rolling platform that puts the top of the laundry basket about 32 inches off the floor. Try this idea out now using a simple cardboard box in your current laundry room. Experiment until you discover the perfect height for you.

laundry room ideas

Here's my wife's laundry basket on a temporary cardboard box. The lip of the basket is just above the bottom of the HE washer opening. The box is about 14 inches tall. Copyright 2018 Tim Carter

Double-Bowl Laundry Utility Sink

I grew up with a double-bowl cast concrete laundry sink in my basement. Now I have a single-bowl thermoplastic one made by Mustee.

Mustee makes a fantastic double-bowl thermoplastic wall-mounted sink. CLICK HERE to order one.

You'll never regret having two bowls in your laundry room. One bowl can be dedicated to YUCK projects while the other bowl can be relegated to CLOTHES ONLY so it's always free of paint, oil, grease, etc.

laundry room utility sink

Here's my single-bowl laundry sink. I wish the builder had made the room longer to accommodate a double-bowl version. All that was needed was 20 more inches! CLICK THE PHOTO to order an affordable Mustee double-bowl wall-mounted thermoplastic sink. Copyright 2018 Tim Carter

Floor Drains Are A Must in Laundry Rooms

I had to install a new drain pump in my washing machine the day before New Years Eve. The job would have gone so much faster had there been a floor drain in my laundry room.

Washing machines can develop leaks. A floor drain can prevent thousands of dollars of damage and you'll have NO MOLD outbreak!

Waterproof Flooring Prevents Mold & Rot

Another key point is waterproof flooring. Don't even consider laminate flooring as it has a wood-dust core.

You want ceramic tile, natural stone or some other material that can be installed over the cement base that will be installed over the waterproof membrane that connects to the floor drain.

Easy Access for Maintenance & Repair

The water shut off valves for the washer need to be above the top of the machine and in clear sight. You should turn off the water each time after the washing is complete. Modern braided supply hoses can fail and a flood will be the result.

The metal vent pipe for the dryer needs to extend up from the base of the machine and go outside through the wall just above the top of the dryer. You should be able to unscrew two or three screws on the 90-degree bend allowing you to slide the dryer out away from the wall to clean out the pipe.

You'll need at least 4 feet of space between the front of the dryer and any cabinets across from it to be able to slide it out the entire way so you can get access.

December 28, 2017 AsktheBuilder Newsletter

-1 F temp
BRRRRRR!!! It's frigid here this week in central New Hampshire.

When I woke up this morning, it was -6 F. The high temperature is supposed claw it's way to 1 F. The wind is howling, it's just before noon and the thermometer says it's -1 F.

In other words, it's damned dangerous to be outside.

Great Teaching Moment - Heat Loss

Are you suffering from the cold too? Is your house cold even though the furnace is running non stop?

There's nothing wrong. This is normal when it gets bitter cold.

Furnaces, boilers, heaters, etc. are sized for an average low temperature. Professional installers look at the weather records and then select a temperature like 5, 10, 15 or even 30 F depending on where you live.

It's silly and wasteful to install a furnace in your home that's so large it can heat the entire Empire State Building! You want your furnace to be just large enough to heat your home and that's it.

Here's a coarse analogy. Imagine trying to heat a giant warehouse with a candle. The poor candle can't put out enough heat each hour to compensate for the HEAT LOSS through the floor, walls and ceiling.

Your furnace, boiler or heat pump is like that candle. When it's operating at full tilt, it can only generate a GIVEN AMOUNT of Btus per hour.

As it gets colder outside, the heat loss, measured in Btus, INCREASES per hour. At some point that Btu heat loss is greater than what your heater can produce.

When this happens, it's impossible to maintain your normal indoor temperature and you get cold.

The solution is to put on more clothes, long underwear and wear a hat. That's what I'm doing right now as I type this. Look at the photo just below.

tim carter askthebuilder

 

Go Patriots!!! Want the NEW Patriots knit hat like I'm wearing in the photo above?

It's got a fantastic felt-like material liner and is SUPER WARM. My youngest daughter gave it to me for Christmas. I love love love it...

CLICK HERE to have it delivered to you home.

There might be a special deal at Amazon where it comes with a free air-pressure gauge you can give to any NFL official you might know. 😉

New Products at AsktheBuilder.com

I introduced two new products at AsktheBuilder.com in the past two days!

Did you know I've been a master plumber since age 29? Yes, it's a fact. I enjoy installing plumbing pipes. To me, it's like a jigsaw puzzle but in 3D.

The new products came about because of increased demand for a service I've provided for years but did a HORRIBLE JOB of marketing.

The first product is a service where I'll draw plumbing plans for your drain and vent lines in your new home or remodel job.

Draw Plumbing Plans

In the photo below, that's a washing machine drain line and it's associated vent line. You also see a vent line to the right coming up from a lower floor.

Do you think you could size all the pipes right and know how they connect in your home? I didn't think so.

Allow me to draw it all up for you.

washing machine drain and vent

 

Most DIYrs have no idea about the correct pipe sizes and the best way to connect all the pipes in a full layout.

That's what I do. As crazy as it sounds, I love making these drawings.

Here's an example of just PART of a drawing:

plumbing isometric drawing

The second product is a short instant download of Best Practices for Installing PVC Drain and Vent Lines.

In this simple document I condense decades of hard-earned knowledge so you don't make the mistakes I did many years ago.

You can get professional plumbing results by following all of what's in this short document.

CLICK HERE to see what it covers.

IMPORTANT NOTE:

I'm about to start PRICE TESTING THIS NEW PRODUCT. The knowledge in this simple document is well worth hundreds of dollars. I know no one would pay that price.

But they might pay $19.95 or $24.95 to get just ONE of the tips. The way you determine this is to change the pricing and see what price sells best. Lowest price does not always win!

Right now it's priced at $14.95.

If you want it for $14.95, then PURCHASE IT NOW.

If you feel you may need this advice in the future - even if another plumber is putting in your system - you should get it right now.

You can include MUCH of what's in the document in your plumbing specifications so you get a fantastic system.

New & Revised Columns For You

I'd look at these columns if for nothing else but the photos and videos that are in them:

undermount kitchen sink

Bulletproof Undermount Kitchen Sinks

Secret Tip to Unclog Toilets FAST!

Load Bearing Wall Identification SECRETS

Granite Sealers - Bet You Didn't Know This

I'll be very busy the next three months revising hundreds and hundreds of older columns for you.

You'll benefit by CLICKING the links to them.

Orlando FL Meet Up

I'll be in Orlando, FL from January 8th-11th for the Builders Show.

I can do a meet up on the night of January 8th if you want. At this point I don't have anything scheduled. But after that, it gets pretty insane.

REPLY to this email if you want to get together. CHANGE the Subject Line to: Orlando Meet Up

That's enough for today.

Happy New Year!

Tim Carter
Founder - AsktheBuilder.com
Drawer of Plumbing Isometric Plans

Do It Right, Not Over!

Draw Plumbing Plans

draw plumbing plans

I'm a master plumber and I can draw plumbing plans like this one in 20 minutes. It shows the fixtures in a bathroom that's being added to an existing home. The solid lines carry water and waste. The dashed lines only carry air and some condensation water. CLICK HERE if you want me to draw your plumbing plans. (C) Copyright 2017 Tim Carter - Master Plumber

Draw Plumbing Plans  Using Years of Experience

You have to draw plumbing plans if you want your plumbing system to go in with no surprises. I've been a master plumber for almost forty years now and know how invaluable a great set of plans is to have on the job site.

I can draw plumbing plans for your new home or remodel. I love making drawings like you see above for an entire house! Watch this video that shows all you get with my Draw Plumbing Plans package:

Related Links

PVC or Cast Iron Drain Lines? What are the Pros & Cons?

Washing Machine Vent Line Tips

CLICK HERE to have Tim Carter draw your drain and vent line plans for your home or remodel job.

Pipe Sizes for Plumbing Plans

It's important to realize pipe sizes must be correct to avoid clogs. Certain fixtures require minimum pipe sizes.

As an illustration, showers need to have a 2-inch drain pipe.

Residential toilets require a minimum 3-inch drain pipe.

Fixture Units Add Up

Another key point is that plumbing drain pipes can only handle so much water flow.

Engineering studies determined many years ago the average amount of water discharged in X seconds by common plumbing fixtures.

These common fixtures in a house are:

  • toilets
  • kitchen sinks
  • vanity sinks
  • tubs
  • shower stalls
  • washing machines
  • floor drains

The first thing to remember as you draw plumbing plans is to keep track of the fixture units so you know when to upsize to the next larger drain line.

Lots Of Hidden Vent Lines

Watch the following video I shot in the winter of 2015 in central New Hampshire. Pay close attention to the pipe sizes and the direction of some of the fittings.


CLICK HERE to have Tim Carter draw your drain and vent line plans for your home or remodel job.

Advice For Architects-To-Be And You Too

garage layout

Can you see the mistake made by the architect in this photo? Look at the short stub foundation wall on the right then the height of the doorway from the garage to the house. (C) Copyright 2017 Tim Carter

Advice For Architects-To-Be And You Too!

Not only do I answer questions each day at my own AsktheBuilder.com website, but I also do the same at another major question site. Two days before Christmas, I answered a most unusual question.

The gentleman wanted to know the best books I’d recommend about building and construction for young architecture students. You might think my first reaction would be to provide a few links from Amazon.com to one or two top books.

I didn’t do that. Instead I uploaded a photo (see above) I had taken the day before of a house being built near me and a short story. I drive by this house each time I go into town. About a week before Christmas, the builder had completed pouring the foundation for a two-car attached garage. There are two separate garage doors in this structure.

As often happens, I did it at the last home I built for my family, the garage foundation is poured at a later date than the house foundation. Doing this allows better access to the house foundation forms for ready-mix concrete trucks. If you decided to pour both foundations at once, you might have to incur the cost of an expensive concrete pump truck.

I decided to take a few photos of the garage and once I pulled into the driveway I shook my head in disbelief. The two-car garage had a fatal flaw.

You need to know that the first floor level of the house is going to be about 2 feet higher than the garage floor. This means there has to be a minimum 3-foot by 3-foot platform that projects into the garage immediately adjacent to the door leading from the garage into the house. Two steps will get you from the platform down to the garage floor.

The edge of the garage door that’s closest to the house is about 28 inches from the sidewall of the house. The platform is going to occupy space that was supposed to be for the car. Now it’s only good for a touring Harley Davidson motorcycle or a golf cart.

My answer to the man asking about the books was that instead of reading about how to build, the young architects-to-be should just go work full-time on construction sites for a minimum of a year. Two years would be a much better investment of time. This hand-on construction experience would pay off in spades later in their career allowing them to better serve their clients.

I went on to mention how the young women and men should work for both remodeling and new construction builders. They’ll quickly discover the challenges faced by builders when trying to work from plans that contain flaws or oversights.

I had a similar mistake happen to me late in my building career. I was on the most challenging job I had ever bid on. The architect was seasoned and we were good friends. He had developed a niche of doing very interesting giant room additions and complex remodel jobs.

This job had me adding a small house onto a house for all intents and purposes. The existing attached garage on the home was to become the new giant kitchen. A new garage with two separate garage doors was going to be in the new structure.

The new structure was brick veneer and the plans called for gorgeous arched openings over the doors. I built the forms for the bricklayer and placed them exactly where the architect said to put them. I trusted the architect had done everything right.

The architect made a mistake and had the arches too low. When you tried to pull in the homeowner’s minivan into the garage, the roof of the van would hit the brick. Had a young architect-to-be been working with me the day we tore out the brick to redo it, I guarantee you she/he would never ever make that mistake in their career.

The young people would also see how frustrating it is to work from plans lacking great details of complex connections, blueprints missing interior elevations, and AWOL room finish schedules along with minimal written specifications.

All of these things lead to misunderstandings, drama, blown budgets and in the worst cases expensive lawsuits where only the attorneys win. If you know a person that expresses an interest in being an architect, please convince them to go get muddy, sweaty and dusty for two years. They’ll forever thank you!

Column 1229